The tools you are going to need to remodel your kitchen depend on how extensive your project is going to be and how much of the work you plan to do yourself. If you are planning to do the whole kitchen, you’ll need tools for removing flooring and cabinets. To remove everything from the kitchen, the basic tools you will want are screwdriver, crowbar, power screwdriver, hammer, and saw.

Screwdriver

The screwdriver is going to be used to remove the cabinets from the walls as most are held up by screws. If you hope to install the old cabinets in a different place of your home, then you will need to be careful when you remove them. If you do not plan to make use of the cabinets in any way, it’s OK to be a bit rough with the door and hinges. To get the higher cabinets down and out-of-the-way, you will likely have to have a step ladder. You might find it simpler to take the lower cabinets away first and to do that you will need to get the appliances out-of-the-way, and remove the kitchen sink. If a plumbing professional just isn’t available, you should have wrenches or pliers to enable you to take out the sink and garbage disposal.

Saw

The saw will likely be needed to take out the countertop off since you will be sawing them into small pieces. When you have removed the cabinets, it will be simple to remove your tile or linoleum flooring. When you get this far, everything should be out of the kitchen so you can check out the walls and replace the sheetrock if needed. If the walls and ceiling are in good shape, you may just need to do a little patchwork or retexture. Once that’s completed, you can replace the electrical outlets and switches and repaint the walls and ceiling. Should you do this yourself, you should acquire painting and drywall supplies and electrical tools. In the event you have completed any work around the house earlier, you might already have most of these tools.

Shortly after painting, you’re able to put new underlayment by screwing it down with a power screw or nailing it down using a power screwdriver. Exactly the same power screwdriver may be used to hang the upper cabinets, along with the lower cabinets. Some people really enjoy installing the flooring, generally when linoleum is used, and then putting the cabinet on top of the flooring, but most people install the cabinets first. The next thing to undertake is to finish it off by putting in the new countertops, dropping in the new sink, hooking up the plumbing, finishing the base, and adding new appliances then you are done.

A number of people have already got the tools required to do the job and also the experience. For others, not only can it be a mastering experience, but numerous tools will need to be purchased.